30-918 - Spring Plate
Swivel Rocker Fiberglass Spring Plate - Black
2-1/2" X 5" x 1/4" Thick
Quantity Discounts Available
Paintable. Used on swivel spring base patio chairs. Replace the spring plates if your swivel rocker feels like its going to fall backwards. This usually indicates that you need new spring plates installed.
30-918 Rocker Fiberglass Spring Plate For Swivel Rocker Patio Chairs
¼” x 2-1/2” x 5” Fiber Glass Rocker Spring Plate
Fiberglass Rocker Spring Plates do not have holes drilled. You will need to use the old spring plate as a template to measure and drill hole to fit your furniture. It is suggested that you use a drill press to make sure the holes are straight. Re-assemble the parts the same way that you took them apart. There should be a metal plate or washer between the bolt head and the spring plate.
The fiberglass spring plate is what keeps your swivel rocker patio chair from tipping backwards when you are sitting and rocking in the chair. It is not uncommon for spring plates to lose their "spring" or strength over time. Our fiberglass spring plates can be drilled to match the existing holes from your old spring plate. Spring plates can also be spray painted to match the color of your patio furniture. (Drills and Spray Paint not included with this product.) See our patio furniture parts HOW TO section for instructions on how to install Fiberglass Spring Plates for Patio Chairs. Our outdoor patio furniture parts are designed to work for most manufacturers of outdoor patio furniture. See the other sections of our website for additional patio furniture repair parts and supplies. Swivel Chair Spring Plates are 2.5” wide by 5” long and ¼” thick.
CLICK HERE FOR INSTRUCTIONS on How To Install New Fiberglass Spring Plates